Hydro-jetting is a widely used drain cleaning solution for both residential and commercial cleaning solutions. It is considered by many homeowners and drain specialists as the most effective drain cleaning solution, among other alternatives like chemical cleaners and snaking.
But many people have asked if hydro-jetting is indeed applicable in all situations, especially when the drain pipes are weak or old. In case you’re wondering if hydro-jetting is the drain cleaning solution you need right now, this post answers your question and any other relevant questions you might have.
But before we delve right into that, let’s consider what hydro-jetting really means.
What is Hydro-jetting, and How Does it Work?
Hydro jetting is a non-invasive drain-cleaning technique that uses high-pressure water to remove clogs of debris, roots, and more stubborn wastes from your sewer line. This drain cleaning technique has been shown to be highly effective, as it uses strong high-pressure water up to 4,000 PSI to dislodge the debris in drain pipes.
Hydro-jetting has been efficiently used in both residential and commercial drain cleaning projects. The most significant edge that hydro-jetting has over other cleaning methods is its ability to clean out more clogs or debris. However, hydro-jetting may not be applicable in all cases. For example, the high-pressure water used in the process can cause further damage to weak pipes.
This is one reason why sewer and drain specialists often carry out sewer line camera inspections before recommending hydro-jetting for cleaning out your drain.
When Is Hydro-jetting Recommended?
If you are currently dealing with a clogged pipe, you should consider speaking with a sewer and drain specialist to see if hydro-jetting is the right drain cleaning solution for you. At N.W Sewer & Drain, we typically recommend conducting a sewer line camera inspection first.
This procedure involves snaking a special camera through the pipes, and a subsequent relaying of the image captured in the camera to a screen positioned above the ground. This gives us a reliable idea of the true nature of the situation within the pipes, and therefore, the right line of action to take.
Why is Hydro-jetting The Better Alternative?
Here are the major reasons why we recommend hydro-jetting for cleaning out your drain pipes:
Hydro-jetting is a very effective drain cleaning solution. The technique can be used to unclog blocked drains, and remove root hairs, different kinds of debris, and stubborn wastes clinging to the walls of your drain pipes.
Because of the efficiency of hydro-jetting, it helps to remove almost every clog in your pipes, making it possible for homeowners to cut back on money spent on drain cleaning. The logic here is that with hydro-jetting, it takes a longer time for the next drain cleaning project to happen.
Unlike other drain cleaning methods that use chemicals, hydro jetting only uses water to remove clogged sewer lines. Drain chemicals can damage your sewer pipes, but with hydro jetting, you don’t have to worry about any chemicals getting into your pipes or causing damage to the sewer line.
Since hydro jetting does not involve the use of chemical cleaners or digging trenches in your yard, it is an environmentally friendly cleaning method. Some chemical cleaners used today can contaminate the environment if their use is not checked.
It is safe
Another edge that hydro-jetting has over other drain cleaning techniques is that it rarely causes any damage to your pipes. However, if the pipes are old or already fractured, we recommend consulting an experienced sewer and drain specialist to check the pipes. That way, you will know if hydro jetting is ideal for clearing your drain pipes.
It is cost effective
With hydro-jetting, the interval of time that elapses before you need to clean your pipes again is usually longer. The technique essentially helps to limit the frequency of future drain clogs and eliminates the need for frequent cleaning, which can lead to strain on the pipes. Remember that clogs develop on top of existing ones. In the long run, it will cost you less to maintain your pipes and drainage.
It is non-invasive
Hydro-jetting is a non-abrasive cleaning method; the cleaning happens right inside the pipes without digging them up. This saves you the trouble of manually searching for the exact spot of the problem. Before hydro jetting is used for cleaning, an initial inspection is conducted to ascertain the condition of the pipes and identify where the clogs are located, and the best technique for the cleaning process.
Hydro jetting is versatile
It is safe and effective for cleaning residential and commercial drain pipes. Contrary to the idea that hydro-jetting is only recommended for cleaning commercial sewer lines, it can be used in other applications. Hydro-jetting has been applied in cleaning many pipe types, including steel pipes, clay pipes, cement sewer lines, cast pipes, and resin-based pipelines.
Getting the Best Sewer and Drain Specialist in Seattle
If you suspect that your drain is clogged, the next best line of action is to get an experienced sewer and drain specialist to examine your sewer line. This technique is more effective and preferable to snaking, and should ideally, be done once or twice a year.
The volume of work that the sewer line does should also be a factor of consideration, so you don’t stress the sewer line. Note that the cost for cleaning sewer line blockages can vary significantly, depending on the amount of work required to clean them out.
At N.W. Sewer & Drain, we service residential and commercial properties in the Greater Seattle area as well as Western Washington outlying cities such as Bellevue, Kirkland, Shoreline, Renton, Lake Forest Park, Bremerton, Mountlake Terrace, Auburn, Mount Vernon, Oak Harbor, Marysville, Everett, Kenmore, Lynnwood, Bellingham, Anacortes, Edmonds, Arlington, and Bothell.
Our hydro-jetting solution is highly effective in ridding different sewer and drain lines of all kinds of debris and clogs. Contact us today at 206-931-7728 to schedule an inspection of your pipes.